Trouble adding phantom DN for DCFW

[johnpi]

I'm trying to add a phantom DN so I can DCFW it to an external number. I know I could use an ACD and NCFW but my boss wants to try it with a phantom to test something. Anyway I made a new phantom superloop and verified it in LD 22 as N104 which I think should correspond to TN's of 69-0 to 69-15. When I go to LD 10 and try to make a set I get SCH5786 superloop does not exist when I try to put in the TN. Could I be entering the TN in the wrong format?

Thanks

 

[bigindian65]

what are you entering at prompts?
REQ:
TYPE:
TN

Mato' Was'aka

 

[johnpi]

REQ: NEW
TYPE: 500
TN: 69 0 0 -and right there it errors

 

[johnpi]

I should also mention that this PBX is set up as a branch office in case that matters.

 

[bigindian65]

it does. your TN is not loop-shelf-card-unit it is loop-unit ie, 69 0, 69 1, 69 2, and so on

Mato' Was'aka

 

[johnpi]

OK, so should I set up a new identical phantom superloop (N104) on the other PBX that this one is a branch of? Because I just tried to enter the TN of 69 0 and I got SCH0120 "wrong number of input fields for prompt TN.

 

[bhassell2000]

what superloops do you see when prt them in ld 97?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/pub/buddy-hassell/7/5a5/b8b

 

[johnpi]

SUPL SUPT SLOT XPEC0 XPEC1 SHLF ZONE0/1 IPR0/1

000 IPMG ---- -- - - -- - - 0 003 10.115.3.5
1 --- ---------------
064 ---- ---- PHANTOM -- - - --- --- - --- ---------------
096 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
100 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
104 ---- ---- PHANTOM -- - - --- --- - --- ---------------

 

[Firebird Scrambler]

Is this of any help for an old Option 11c system?.


Loop number for providing Phantom DN's on a Option 11c V04.00
The example Port numbers used are TN's 61 0 - 61 15


LD 97
REQ CHG
TYPE SUPL
SUPL N96

REQ PRT
TYPE SUPL
SUPL

SUPL SUPT SLOT XPEC0 XPEC1

000 STD LEFT 01 0 1 -- - - (1-4)
004 STD LEFT 02 0 1 -- - - (5-8)
008 STD LEFT 03 0 1 -- - - (9-12)
012 STD LEFT 04 0 1 -- - - (13-16)
016 STD LEFT 05 0 1 -- - - (17-20)
032 STD LEFT 06 0 3 -- - - (21-24)
036 STD LEFT 07 0 3 -- - - (25-28)
040 STD LEFT 08 0 3 -- - - (29-32)
044 STD LEFT 10 0 3 -- - - (33-36)
048 STD LEFT 09 0 3 -- - - (37-40)
064 STD LEFT 11 0 3 -- - - (41-44)
068 STD LEFT 12 0 3 -- - - (45-48)
072 STD LEFT 13 0 3 -- - - (49-50)
096 ---- ---- PHANTOM -- - -
108 VIRTUAL CARDS 73 - 76 93 - 96
112 VIRTUAL CARDS 77 - 80 97 - 99
128 STD LEFT 32 0 1 33 2 3
132 STD LEFT 34 0 1 35 2 3
136 STD LEFT 36 0 1 37 2 3
140 STD LEFT 38 0 1 39 2 3
144 STD LEFT 40 0 1 41 2 3
148 STD LEFT 42 0 1 43 2 3
152 STD LEFT 44 0 1 45 2 3
156 STD LEFT 46 0 1 47 2 3


SUPL 96 100 104 108 112

TN SLOT No 61 - 64 65 - 68 69 - 72 73 - 76 77 - 80
(Virtuals) 81 - 84 85 - 88 89 - 92 93 - 96 97 - 99

P.S. Is your system a 1000e?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[johnpi]

It is a branch office so I think it is called 1000b

 

[bigindian65]

runs on same type protocol as an 11

Mato' Was'aka

 

[johnpi]

DISK SPACE NEEDED: 144 KBYTES
ANALOGUE TELEPHONES AVAIL: 0 USED: 16 TOT: 16

I just realized I'm out of analog sets on this pbx. Do I need open analog set to make a phantom?

 

[bigindian65]

what Rls you on? Phantom ports have their own pool and do not use your analog Lics

Mato' Was'aka

 

[johnpi]

OK, dumb question but how do I check what release I'm on?

 

[bigindian65]

actually, do an SLT @ the REQ prompt in ld 22, towards bottom, is there a phantom ports item?

Mato' Was'aka

 

[bigindian65]

fyi - at same prompt you can do issp and see your Rls info

Mato' Was'aka

 

[johnpi]

System type is - Communication Server 1000E/CP PM

PHANTOM PORTS 400 LEFT 400 USED 0

OK, plenty of phantom ports.

 

[johnpi]

Release 5

 

[johnpi]

I found a TN that works. 112 1 3 3. Now when I try to do the DCFW I get errors

At the FTR prompt I put DCFW 12 9xxxyyyy and it errors and gives me

SCH5199
An invalid internal DN has been entered for the CFW key. The entered DN
is either a normal DN, or FFC+DN. The validation is done for both CFXD
and CFXA classes of service.

 

[bigindian65]

cls UNR CFXA FTTU on your phantom

Mato' Was'aka