Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trouble adding phantom DN for DCFW

Status
Not open for further replies.

johnpi

Technical User
Oct 30, 2009
33
US
I'm trying to add a phantom DN so I can DCFW it to an external number. I know I could use an ACD and NCFW but my boss wants to try it with a phantom to test something. Anyway I made a new phantom superloop and verified it in LD 22 as N104 which I think should correspond to TN's of 69-0 to 69-15. When I go to LD 10 and try to make a set I get SCH5786 superloop does not exist when I try to put in the TN. Could I be entering the TN in the wrong format?

Thanks
 
what are you entering at prompts?
REQ:
TYPE:
TN

Mato' Was'aka
 
REQ: NEW
TYPE: 500
TN: 69 0 0 -and right there it errors
 
I should also mention that this PBX is set up as a branch office in case that matters.
 
it does. your TN is not loop-shelf-card-unit it is loop-unit ie, 69 0, 69 1, 69 2, and so on

Mato' Was'aka
 
OK, so should I set up a new identical phantom superloop (N104) on the other PBX that this one is a branch of? Because I just tried to enter the TN of 69 0 and I got SCH0120 "wrong number of input fields for prompt TN.
 
SUPL SUPT SLOT XPEC0 XPEC1 SHLF ZONE0/1 IPR0/1

000 IPMG ---- -- - - -- - - 0 003 10.115.3.5
1 --- ---------------
064 ---- ---- PHANTOM -- - - --- --- - --- ---------------
096 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
100 ---- ---- VIRTUAL -- - - --- --- - --- ---------------
104 ---- ---- PHANTOM -- - - --- --- - --- ---------------
 
Is this of any help for an old Option 11c system?.


Loop number for providing Phantom DN's on a Option 11c V04.00
The example Port numbers used are TN's 61 0 - 61 15


LD 97
REQ CHG
TYPE SUPL
SUPL N96

REQ PRT
TYPE SUPL
SUPL

SUPL SUPT SLOT XPEC0 XPEC1

000 STD LEFT 01 0 1 -- - - (1-4)
004 STD LEFT 02 0 1 -- - - (5-8)
008 STD LEFT 03 0 1 -- - - (9-12)
012 STD LEFT 04 0 1 -- - - (13-16)
016 STD LEFT 05 0 1 -- - - (17-20)
032 STD LEFT 06 0 3 -- - - (21-24)
036 STD LEFT 07 0 3 -- - - (25-28)
040 STD LEFT 08 0 3 -- - - (29-32)
044 STD LEFT 10 0 3 -- - - (33-36)
048 STD LEFT 09 0 3 -- - - (37-40)
064 STD LEFT 11 0 3 -- - - (41-44)
068 STD LEFT 12 0 3 -- - - (45-48)
072 STD LEFT 13 0 3 -- - - (49-50)
096 ---- ---- PHANTOM -- - -
108 VIRTUAL CARDS 73 - 76 93 - 96
112 VIRTUAL CARDS 77 - 80 97 - 99
128 STD LEFT 32 0 1 33 2 3
132 STD LEFT 34 0 1 35 2 3
136 STD LEFT 36 0 1 37 2 3
140 STD LEFT 38 0 1 39 2 3
144 STD LEFT 40 0 1 41 2 3
148 STD LEFT 42 0 1 43 2 3
152 STD LEFT 44 0 1 45 2 3
156 STD LEFT 46 0 1 47 2 3


SUPL 96 100 104 108 112

TN SLOT No 61 - 64 65 - 68 69 - 72 73 - 76 77 - 80
(Virtuals) 81 - 84 85 - 88 89 - 92 93 - 96 97 - 99

P.S. Is your system a 1000e?.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
It is a branch office so I think it is called 1000b
 

DISK SPACE NEEDED: 144 KBYTES
ANALOGUE TELEPHONES AVAIL: 0 USED: 16 TOT: 16

I just realized I'm out of analog sets on this pbx. Do I need open analog set to make a phantom?
 
what Rls you on? Phantom ports have their own pool and do not use your analog Lics

Mato' Was'aka
 
OK, dumb question but how do I check what release I'm on?
 
actually, do an SLT @ the REQ prompt in ld 22, towards bottom, is there a phantom ports item?

Mato' Was'aka
 
fyi - at same prompt you can do issp and see your Rls info

Mato' Was'aka
 
System type is - Communication Server 1000E/CP PM

PHANTOM PORTS 400 LEFT 400 USED 0

OK, plenty of phantom ports.
 
I found a TN that works. 112 1 3 3. Now when I try to do the DCFW I get errors

At the FTR prompt I put DCFW 12 9xxxyyyy and it errors and gives me

SCH5199
An invalid internal DN has been entered for the CFW key. The entered DN
is either a normal DN, or FFC+DN. The validation is done for both CFXD
and CFXA classes of service.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top