Transtalk Avaya 9040 Noise 1

[selmerjoe]

Hello,

Ok I have customer with (2) transtalk base units and (4) 9040 phones. The base units work by them self and all 4 phones test fine. If the two units are in sync but are a good 50 feet apart the phones get horrible line noise. The customer looses calls and clicking happens. We tried the base units next together same problem. I told them to try them apart with out snycing them and try them next together syncing them. I just don't know what the correct protocol is for having more then one transtalk base unit. Could some please educate me on the proper setup and why the manual does not help at all. Thanks!

 

[selmerjoe]

Dag,

The customer needs system functionality such as transfer, etc. That is the only thing that makes the 9040 more attractive. Thanks again so much for your insight!

 

[1043]

You can transfer with an analog phone. Also look at the 3910 it doesn't have the same range but is a more solid phone.You would have to pool the system if you have more than 2 lines but with the Partner you can pick and chose which extension are keyed and which are pooled.So only the 3910 would have to be pooled.
Another thing you can do is plug a single line wireless phone into the aux port of a system phone and use it when you have to leave your desk.(analog wireless headset)