transfer to trunk

[bitapn]

hi.
i have a openscape 4000 v7.i can not transfer the calls to a trunk.these are the trunks configurations:

ADD-TDCSU:NEW,1-01-014-0,10,10,0,0,100,1,1,"PRI ",0,ETSI,1,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,,0,1,1,EMPTY,10,1,N,,,,,,16,8,0,10,,EC&G711&G729A,,10,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,Y,1,1,0,0,2,0,0;


ADD-COSSU:,100,,,,,,,,"PRI";
CHA-COSSU:COS,100,TA&TNOTCR&CDRS&CDRC&CDRIND&CDRINT&RKOABS&CFNR;
CHA-COSSU:COS,100,FWDNWK&TTT&FWDDIR&FWDECA&FWDEXT;
CHA-COSSU:COS,100,,NOCO&NOTIE&TTT;
CHA-COSSU:COS,100,,,NOCO&NOTIE&TTT;

ADD-COT:10,XFER&ANS&CHRT&CPS6&COTN&BLOC&DPRE&LWNC&NLCR&ICZL&ICZO&DFNN&APSM&NLRD&NTBO&NPIS&NTON;

ADD-COP:10,,TA,TA;

 

[sbcsu]

Node numbering has to be correct for trunk to trunk to work.

 

[bitapn]

could you bring an example?
i do not know the details exactly.

 

[sbcsu]

Assuming RICHT is 1, LDAT is 1

CHA-TDCSUEN=1-1-14-0,NNO=999;

CHA-RICHT:MODE=LRTE,LRTE=1,DNNO=999;

CHANGE-LDAT:LROUTE=1,LSVC=ALL,LRTEL=1,DNNO=999;


Try the transfer again and let me know