Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TRANSFER TO EXTERNAL NUMBER 1

Status
Not open for further replies.

koulioumbis

IS-IT--Management
May 21, 2009
421
GR
Hello team.
I have an issue with IPO500V2 10.1
The issue is when being on a call ( ISDN BRI) and I need to transfer the call to an external number ( my mobile for example) when pressing the transfer the call gets on hold and then I get diatone but when starting dialing the number I get number busy after the 4 dialed digits.
Any ideas?

Thanks

Nikos
 
In the Telephony tab under "system". set the "inhibit off switch transfer. You can set it individualy with users/telephiny as well. But the first step sets it for the whole system
 
I think you may want to check inhibit off switch forward/transfer both for system and user... not sure if that was mentioned yet [ponder]

The truth is just an excuse for lack of imagination.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top