Traffic reports on loop?

[cdldean]

I need to generated hourly traffic reports on loop 3. This loop is a PRI to a Unity server. My manager needs to find out how much traffic is running across.

I have a Meridian option 61C. Any help would be appreciated.

Thank you,

cdldean

 

[matambanadzo]

Hi,

The best solution would be to use traffic reports from ld 2. If you read that section of the NTP's you will find that you can set hourly reports to be generated for either network loops or, what would be better, route's. The only catch is that the PABX generates the report and outputs it to a tty, once that is done the report is reset, thus you require a pc to catch the reports. Have a play in ld 2 and see if it helps.

Cheers