Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
to change a basic line pattern color,Black to spot color 1
- Thread starter arshzafar
- Start date
-
1
- #2
- Thread starter
- #3
...yep, now fixed, try this attached ai file (CS3), compressed into a ZIP archive...
...problem are the three patterns, gravel, Bird feet, Plaster/stucco/mortar...
...these patterns needed bounding boxes at the very bottom of the patterns, fill none, stroke none...
andrew
...problem are the three patterns, gravel, Bird feet, Plaster/stucco/mortar...
...these patterns needed bounding boxes at the very bottom of the patterns, fill none, stroke none...
andrew
...if come across other patterns like this, you need to drag the pattern to the art board from the swatches, make a duplicate of the existing white box (control/command B) send to back UNDERNEATH, very bottom of hierarchy, and set that duplicate box to a fill of none and stroke of none...
...then, select the whole pattern again and drag back over the swatch (with the alt/option key held down to overwrite) in the swatches palette, all instances will update where used on the artwork, then re-color as normal...
andrew
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question