Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TMDI201

Status
Not open for further replies.
HelpAtWork

HelpAtWork

Technical User
Mar 20, 2008
71
CA
Can anyone help me with TMDI201 message or point me in the direction as to what this means, how to remove this message. Greatly appreciated.

Procomm Plus Ready!
Procomm Plus Ready!

TMDI201 5 00000011

AUD000

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

AUD000

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TIM000 10:00 5/3/2012 CPU 0

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

ERR183 2112 8 13

TMDI201 5 00000011

TMDI201 5 00000011

TIM000 10:15 5/3/2012 CPU 0

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

AUD000

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011

TMDI201 5 00000011


 
Sort by date Sort by votes
Here's the definition for this message:

TMDI0201 x appl
TMDI x sent a message to the Meridian 1 indicating an application data
space
has been corrupted. Where: x = device number (LD 17 DNUM) and appl =
the
application name.

Severity: Info

I would disable the TMDI card, then force a download of the firmware.

You will need to disable any D-Channnel on the card in LD 96, then Disable the Loop in LD 60, then return to LD 96 and disable the card (DIS TMDI 5), then enable the card and force a download (ENL TMDI 5 FDL). Wait for the operation to complete, then go back to LD 60 and enable the loop. If the D-Channel does not respond in a reasonable amount of time, you may need to manually enable the D-Channel in LD 96.
 
Upvote 0 Downvote
Or you can just do a dis tmdi 5 all in LD 96 or 48 and then force download it, disable it, then enable it. This will usually clear up any issues. The loop and dch should establish on their own after this procedure.
 
Upvote 0 Downvote
There is no DCH on Card 5. I was under the impression that my issue was with card 4 (which is the backup DCH).. as 00000011 converts to 4 in LD 32 conv.

Am I way off? Or is this a problem with card 5, which has no DCH.. and a FDL should resolve the issue with that card?

 
Upvote 0 Downvote
Thanks Buddy, how do you print the dchannel's? What load would I use? (how would I know if card 4 id dch 5?)

 
Upvote 0 Downvote
Buddy, Card 4 has backup DCH 16, there is no card 5.

>ld 60
DTI000
.stat 4

PRI* TRK LOOP 4 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - BUSY ISA CH 02 - IDLE ISA
CH 03 - BUSY ISA CH 04 - IDLE ISA
CH 05 - BUSY ISA CH 06 - BUSY ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - BUSY ISA CH 10 - BUSY ISA
CH 11 - BUSY ISA CH 12 - IDLE ISA
CH 13 - BUSY ISA CH 14 - IDLE ISA
CH 15 - BUSY ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - BUSY ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - BUSY ISA CH 24 - BKUP DCH 16
.stat 3

PRI* TRK LOOP 3 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - BUSY ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - BUSY ISA
CH 07 - BUSY ISA CH 08 - IDLE ISA
CH 09 - BUSY ISA CH 10 - IDLE ISA
CH 11 - BUSY ISA CH 12 - BUSY ISA
CH 13 - BUSY ISA CH 14 - IDLE ISA
CH 15 - BUSY ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - BUSY ISA
CH 19 - BUSY ISA CH 20 - BUSY ISA
CH 21 - BUSY ISA CH 22 - IDLE ISA
CH 23 - BUSY ISA CH 24 - DCH 15
.
TMDI201 5 00000011


DTI000
.stat 8

PRI* TRK LOOP 8 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - BUSY ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - BUSY ISA
CH 09 - BUSY ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - BUSY ISA
CH 13 - IDLE ISA CH 14 - BUSY ISA
CH 15 - BUSY ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - BUSY ISA CH 20 - BUSY ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - BUSY ISA CH 24 - BUSY ISA
.stat 9

PRI* TRK LOOP 9 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE ISA CH 02 - IDLE ISA
CH 03 - IDLE ISA CH 04 - IDLE ISA
CH 05 - IDLE ISA CH 06 - IDLE ISA
CH 07 - IDLE ISA CH 08 - IDLE ISA
CH 09 - IDLE ISA CH 10 - IDLE ISA
CH 11 - IDLE ISA CH 12 - IDLE ISA
CH 13 - IDLE ISA CH 14 - IDLE ISA
CH 15 - IDLE ISA CH 16 - IDLE ISA
CH 17 - IDLE ISA CH 18 - IDLE ISA
CH 19 - IDLE ISA CH 20 - IDLE ISA
CH 21 - IDLE ISA CH 22 - IDLE ISA
CH 23 - IDLE ISA CH 24 - DCH 17
.


 
Upvote 0 Downvote
Thanks...

So, like I say.. I have no DCH 5.. 15, 16 and 17..

Card 3 is DCH 15, primary DCH
Card 4 is DCH 16, backup DCH
Card 9 is DCH 17, primary DCH (different provider).

I am trying to pinpoint which TMDI is giving me the error.. TMDI201 5 00000011

Originally I figured it was card 5, but after reading a few threads I was lead to believe it may be 4 (00000011 converts to 4).



 
Upvote 0 Downvote
The error is pointing to card 5. If there is no D-channel, then that's great.

Disable the loop associated with that card (or run the risk of dropping active calls), disable the card, then re-enable with the FDL option.
 
Upvote 0 Downvote
Thanks for the help. FDL cleared it all up.

Any idea what would cause this? Do I need to worry about an underlying problem?

Other than the annoying screen filling error, what problems could this cause in the switch? Only asking out of curiousity...



 
Upvote 0 Downvote
In my experience, bouncing a TMDI card and doing a FDL when enabling will clear up 99% of these types of problems (non-carrier related).

I have sites with anywhere from 1 to 13 TMDI's and I may have to do this once year (That is across all sites, not per site).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Tbrandes
  • Locked
  • Question
tmdi201 error code?
Replies
4
Views
29
Tbrandes
Tbrandes

Part and Inventory Search

Sponsor

Back
Top