Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TLS for remote phones only with an ASBC

Status
Not open for further replies.

cjjb

Programmer
Oct 31, 2007
15
US
Hello all,

I have a question about TLS encryption on an IPO 500vr R11.1.1.0 build 18 system. We have a customer using an ABSCE for remote phones, desktop and mobile apps only. I was wondering if you can have TLS only on the remote devices connected to the ABSCE and not the local phones? The ABSCE is not running through a firewall. Any assistance is greatly appreciated

Thanks,
CJJB
 
derfloh: Like so?

44_dxgiku.png


On my app, I am getting VoIP Phone Service Unavailable. I do not see it trying to grab the /rwsettings.txt here

2022-06-22_10-35-55_fuceb7.png


To test, I added this to the reverse proxy:

2022-06-22_10-17-37_ydjd9a.png


I then configured the app using web address rather than my email:
Lets me log in, never get the green check mark.

I do however see it getting to rwsettings.txt

1_xldsgb.png


2_ahhuhx.png


Should I have TLS Disabled on the IPO? I would assume so as the 46xxsettings.txt is auto generated.


ACSS / ACIS
 
derfloh: Appreciate the help. Not looking like this is going to work with their current configuration with one of the LAN Ports taken up by the SIP Trunk.

ACSS / ACIS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top