Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Timed drop feature Nt(X)

Status
Not open for further replies.

teltech54

Vendor
Jun 28, 2010
18
US
This feature used to work in 3.2 and lower.

We cannot get it to work with 5.0 or 8.1 (the release I have in my office and the release on cust site)

Has anyone tried this feature on 8.1 yet? and got it to work?
 
from the 8.1 help

· t - Allowed Call Duration
Set the maximum duration in minutes for a call plus or minus a minute. Follow the character with the number of minutes in brackets, for example t(5)

It hasnt changed.

ACSS - SME
General Geek

 
Did you put the Nt(X) in the Telephone number part and not in the Code part?

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool )
______________________________________
 
Hairlesssupportmonkey,

I know it has not changed. I put the code in a release 3.52 as 8XXX | Dial Extn | 8Nt(1) | 0 to limit calls to extn 8XXX to one minute.
I put the same code in a 500 with 5.0(8) and 8.1(67) and it does not work.
I was wondering if anyone has actually got it to work in a newer release.

Bas1234
This is how the code is entered.
8XXX | Dial Extn | 8Nt(1) | 0
Code | feature | Tel No.| Line grp ID
 
My bad, I found out something new.

The short code works if you call an extension from an extension using the short code.

It does not work if the call is from the outside and the call is transferred using the short code.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top