Time Profiles Query IPO500v2 R.9.0.3 2

[Tony_A1SL]

I have the following setup:

BRI Line 5 with Incoming Group ID set to 155 on the BRI Line tab

Incoming Call Route has Line Group ID set to 155 in the Standard tab and the Destinations tab set in the order as keyed below. I understand the list executes from the bottom up.
Default Value: Ext 221
Night: VoiceMail
Evening: Ext 222
Day: Hunt Group 155

Hunt Group 155 has 14 extensions assigned to it

Time Profiles are set as:
Night: 00:00 - 06:59 and 23:00 - 23:59
Evening: 19:00 - 22:59
Day: 07:00 - 18:59

My problem is, when a call comes in on this line during the evening, I would expect only extension 222 to ring, however all extensions in the Hunt Group ring. On each 9508 phone that should NOT be ringing, the display reads 'External>Extension 222"

Any ideas welcomed please.

 

[derfloh]

Do they have brushed appearances or line appearances? Or is 222 forwarded in any way to the group?

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[Tony_A1SL]

@derfloh, all the extensions have Line Appearances. I get exactly where you’re coming from and fear it may therefore not be possible to achieve what I’m attempting. Hopefully there’s a workaround?

 

[derfloh]

The Workaround is to remove the line appearances. If you want others to be able to pick those Calls you can setup call forwarding on busy/no answer to a group or user buttons.

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[Tony_A1SL]

@derfloh, many thanks for your help.