We have an IP403 system with an analog 16 unit attached. The time profile we have setup works ok but, a shortcode set up to set the huntgroup out of service does not work. Shortcodes work OK on our test system.
Also noticed when out of hours, a fresh look at the config shows the huntgroup still in service, even though it is not. Using VM Lite BTW.
Only thing I can see is the firmware differs on the 403 and the POTs16... IP 403 is showing 2.0(16) while the POT16 shows 3.3(34). Can't find a newer BIN file for the POTs on the admin CD..
Any help appreciated...
Also noticed when out of hours, a fresh look at the config shows the huntgroup still in service, even though it is not. Using VM Lite BTW.
Only thing I can see is the firmware differs on the 403 and the POTs16... IP 403 is showing 2.0(16) while the POT16 shows 3.3(34). Can't find a newer BIN file for the POTs on the admin CD..
Any help appreciated...