Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Timberwolf 9740 library Error FSC 32A1
- Thread starter duque
- Start date
According to my 9714 2.00.02 (date: 12/01/99) firmware that error would be:
ERR_SYSEFLGWT_TIMEOUT_IN_STRT_SCN,
Timeout in camera software waiting for hand to start scan. If servo errors proceeds this one then use that errors fru list.
Note: Might need to check if z mechanism can reach to both top and bottem crash stops. Are crash stops intact and not damaged?
FRU: LOCATION: CONFIDENCE %:
HAND ASSY LSM 50
PRC LCU 40
Z CRASH STOP PROBLEM LCU 10
ERR_SYSEFLGWT_TIMEOUT_IN_STRT_SCN,
Timeout in camera software waiting for hand to start scan. If servo errors proceeds this one then use that errors fru list.
Note: Might need to check if z mechanism can reach to both top and bottem crash stops. Are crash stops intact and not damaged?
FRU: LOCATION: CONFIDENCE %:
HAND ASSY LSM 50
PRC LCU 40
Z CRASH STOP PROBLEM LCU 10
- Status
