Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TAC problem 1
- Thread starter rauliz
- Start date
-
1
- #2
AvayaTier3
Technical User
Use cor restrictions to allow or deny the station's COR to call or be called from the trunk-group's (TAC) COR
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
- Thread starter
- #3
AvayaTier3
Technical User
Dial Access? y
this field on your trunk-group for will allow TAC dialing if your trunk-group is not isdn.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
this field on your trunk-group for will allow TAC dialing if your trunk-group is not isdn.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
- Thread starter
- #5
Hello,
I have enabled this option in the trunk group, but I want to restrict that this TAC code only can be used for 4 users in all building, so I need to configure a new COR.
But I don't know what is the option that I have to configure in the new COR to allow these four users to use the TAC Code.
I have enabled this option in the trunk group, but I want to restrict that this TAC code only can be used for 4 users in all building, so I need to configure a new COR.
But I don't know what is the option that I have to configure in the new COR to allow these four users to use the TAC Code.
- Thread starter
- #6
Hello,
Maybe I don't explain very well. I have enable option "Dial Access? y" in Trunk group.
I need to configure a new COR to allow only four extensions to use this TAC Code and if they try to use this TAC code from other extensions that doesn't have this COR, they cannot use it.
Is it possible to configure it? What is the option that I should have enable in the new cor?
Thanks in advance.
Maybe I don't explain very well. I have enable option "Dial Access? y" in Trunk group.
I need to configure a new COR to allow only four extensions to use this TAC Code and if they try to use this TAC code from other extensions that doesn't have this COR, they cannot use it.
Is it possible to configure it? What is the option that I should have enable in the new cor?
Thanks in advance.
- Thread starter
- #8
You are right.
I want to route all calls directly to the PSTN only for four users.
There are problems when they try to send long distance faxes via internal Line. A provisional solution is provide the user the tac code to go thru the PSTN, but it is a security problem because anybody could call wherever he wants. This is the reason why I want restrict it only to 4 extensions.
I want to route all calls directly to the PSTN only for four users.
There are problems when they try to send long distance faxes via internal Line. A provisional solution is provide the user the tac code to go thru the PSTN, but it is a security problem because anybody could call wherever he wants. This is the reason why I want restrict it only to 4 extensions.
- Status
Similar threads
- Locked
- Question