Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

T1 Traffic Study with OTM 2.2 via IP 1

Status
Not open for further replies.

pbxnewman

MIS
Jul 13, 2005
29
CA
Does anyone know how to capture the amount of traffic there is on the PRI with a given range of time? i.e. 9AM-5PM.

I tried using the data bufferring and access feature but I couldn't capture anything. Not sure if I have configured it correctly.

My goal is to determine if I can remove one of my 3 PRI cards and its service. I have my OTM server connected to our system via IP.
 
Thanks acewarlock. I am aware it is through LD 2. However it is not working for me. Think i am still doing something incorrectly. Would you be able to provide me a run down of the key steps I should take to atleast have it spit out a simple report? Please help!!!

Thanks!!
 
I don't have the traffic program in my OTM. I do it the old fashion way, 1 hour at a time. do you have the NTP's with LD 2 in it? It's easy to do but hard to explain here.
 
Let me confirm acewarlocks statement:

Here is me

>ld 2
TFC000
.sopc 0 3 4 -- 2 Setting customer report 2 - trunks
.sshc 0 01 01 31 12 -- just hitting enter because the dates were OK
08 17 3 -- again the hours are OK too
2 3 4 5 6 -- days were OK)
.copc 0 2 3 4 -- 2 OI "cleared report 2" since I don't want it
.topc 0 3 4 -- "Tell Options Customer = TOPC reponds with the report #3 aqnfd #4
.
TFC000
See? Easy as pie - and that was from memory


Special and unique (and based on books released this month by NT) set of daily books here for a few days:

- click on the word "Ohms"

Do NOT miss this if you haven't seen them... All free all the time.

~
Gene of ~
 
OTM TRAFFIC ANALYSIS

SITE CLICK
TELEMANAGEMENT
CLICK TRAFFIC ANALYSIS
MAINTENANCE
TRAFFIC DATA COLLECTION
SELECT SET UP PBX FOR TRAFFIC
OK
BACK TO MAINTENENACE
TRAFFIC DATA COLLECTION
CHOOSE SCHEDULE TRAFFIC COLLECTION
CLICK OK
BRINGS UP BOX FOR ADD TASK TO SCHEDULING
“TRAFFIC DATA COLLECTION”
ENTRY INTO “JOB SELCTION” GIVE IT A NAME “ TRAFFIC”
CLICK “OK”
BRING UP SCHEDULER WINDOW THEN
RIGHT CLICK ON TRAFFIC “JOB” GO TO
PROPERTIES SELECT HOURLY FOR INTERVAL
AND START TIME AND DATE IF YOU NEED IT
UNDER STATUS CLICK ENABLE
MINIMIZE SCHEDULER, DO NOT CLOSE IT AS IT NOW HAS TO STAY OPEN UNTIL YOU HAVE COLLECTED ALL THE TRAFFIC YOU WANT OR YOU CAN RIGHT CLICK AND DISABLE IN PROPERTIES SCREEN
GO BACK TO TRAFFIC ANALYSIS SCREEN AND CLICK ON MAINTENANCE
FILTER EDITOR
SELECT FILE
OPEN
UNDER FILE NAME CALL FILE “WORKDAY”
CLICK “OK”
SCREEN THIS FILE DOES NOT EXIST, CREATE THE FILE SELECT YES
SCREEN POPS UP WITH A TIME AND DATE CHART
DESCRIPTION “BUSINESS HOURS”
DATE ENTER START DATES AND END DATES FOR COLLECTION OF TRAFFIC
JUST BEFORE CUTOVER AND SAY 1 WEEK AFTER DEPARTURE
SELECT THE LIKE 7:00AM TO 6:00PM OR WHAT EVER THE MAIN WORK HOURS TRY TO PUT IN 1 HOUR BEFORE START AND AN HOUR AFTER.
CLICK “INCLUDE” FOR DATE AND TIME
DO YOU WANT TO SAVE “YES”
CLOSE FILTER EDITOR
TRAFFIC ANALYSIS SCREEN CLICK REPORTS CLICK CUSTOMER REPORTS
DROP DOWN MENU SELECT TRUNKS, PROFILE CLICK EDIT CUSTOMER REPORT SCREEN SELECT TRUNK REPORT CLICK EDIT FOR THE PROFILE TAKE OUT OR UNCLICK TOLL PEG COUNT, INC. ISA SHIT, OUT INC ISA SHIT,AND ALL TRUNKS BUSY FOR NON PRIORITY USERS
REGULAR ALL TRUNKS BUSY STAYS IN
CLICK CLOSE AND SAVE CHANGES
BACK TO THE CUSTOMER REPORT SCREEN
CLICK EDITOR CLICK “OTHER”
SELCECT THE WORKDAY FILTER YOU JUST BUILT, CLICK “OK” THEN OK
THIS RUNS THE REPORT TO THE SCREEN

UNDER THE TRAFFIC ANALYSIS SCREEN CLICK CUSTOMER REPORTS
UNDER CUSTOMER REPORT SHOULD BE TRUNKS(DEFAULT SHOS AS NETWORKS
CHECK TO SEE THAT WORKDAY FILTER IS THERE.
CLICK OK
WHEN READY TO PUT AQLL INFO TO DISK
THE ZOOM WINDOW THERE IS AN ENVELOPE CLICK THAT AND GET AN EXPORT SCREEN
FORMAT DROP DOWN AND SELECT EXCEL 5.0
DESTINATION SELECT DISK FILE CLICK OK
THEN SELCT THE DRIVE TO SEND IT TOO
THEN CLICK OK

 
Thanks!!! But sorry guys... I still don't have it up yet. The following was what I tried.

sopc 0 2 NIL --
.sshc 0 20 2 24 2 20 02 24 02 --
00 23 3 --
1 2 3 4 5 6 7 --
.copc 0 2 2 --
.topc 0 2 NIL
.
TFC200

Based on this excel spreadsheet, I guess I should be looking for TFC002 for trunks in the report once I have it up an running right?

Any ideas?

Sorry worldwidedialtone, all I have is OTM general. I don't have access to Telemanagment. I can only use Data Buffering and Access.
 
Actually, that helps a lot. Note that that double dash - that is the point at which it is asking what "you" want to enter....so this is exactly what you want to see - anything more than your previopus post is my typing

sopc 0 2 NIL -- 2
.sshc 0 20 2 24 2 -- 01 01 31 12
00 23 3 -- 00 23 3
1 2 3 4 5 6 7 -- 2 3 4 5 6
.copc 0 2 2 -- DO NOT PERFORM A COPC (that is "Clear Options Customer")
.topc 0 2 NIL will not appear unless you did a COPC

~
Gene of ~
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top