Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

System renumber Basic Edition

Status
Not open for further replies.

ReidTel

Vendor
Jan 19, 2008
102
US
I have a customer that has an IPOV2 Basic Edition. They are changing their extension numbers to numbers that are beyond the port extension range on the combo cards. They currently have extensions 100 - 115 and they want to change to 111 -124. Does Basic Edition allow for me to renumber the extension range? When I tried I kept receiving a message saying that extension numbers cannot overlap. I'm probably doing it incorrectly but I'm only familiar with the ease of doing it in Essential Edition. Would doing a backup, erase configuration and starting from scratch be another option if renumbering can't be done? Thanks for any advice you can give.

Larry Reid
Reid Telesys Communications

 
Please disregard this post. Had a brain cramp. Got it done.

Larry Reid
Reid Telesys Communications

 
Reidtel
Having same brain fart. What did you do?
jacktel
 
Just make sure the extension range doesn't overlap. That's why I said I had a brain cramp because it was plain as day to see that I had done that.

Larry Reid
Reid Telesys Communications

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top