I have two identical PE4600 servers, bought at the same time. One is in a live environment, one is used as our development box.
We are having constant memory problems with the live box, which Dell seem to be incapable of fixing. In the meantime, I'm thinking of swapping our development server with the live one. So my question is...
If we have the same disk setup in each (a RAID 1 pair & a RAID 5 set), and have all the firmware at the same levels, should I be able to just switch them off, swap the disks around, and bring them back up? I'm thinking this should work, but I don't want to knacker the RAID sets by doing something stupid!
Cheers,
Iain
We are having constant memory problems with the live box, which Dell seem to be incapable of fixing. In the meantime, I'm thinking of swapping our development server with the live one. So my question is...
If we have the same disk setup in each (a RAID 1 pair & a RAID 5 set), and have all the firmware at the same levels, should I be able to just switch them off, swap the disks around, and bring them back up? I'm thinking this should work, but I don't want to knacker the RAID sets by doing something stupid!
Cheers,
Iain