SV9100/umobility

[OldNortellian]

Has anyone gotten this to work with iPhones? I must be missing something, the app just keeps timing out. Any ideas? Thanks in advance.

At the end of the day, it's just dial tone.

 

[PFD45]

If you have a generic SIP phone you can use it to verify your programming in the 9100. If the SIP phone works then any problems are in the configuration of the uMobility app.

Personally, I think the only reason anyone would use uMobility is because they haven't been exposed to MultiLine Client (MLC).

uMobility is like having a single line phone appearance on your smart phone. MLC is like having a Dterm on your smart phone. If you have a DT700 or DT800 programmed up then you can start your MLC app and "override" the DT700 and have all of it's features.

Regardless, you'll need some 5103 licenses assigned in 10-54.

 

[OldNortellian]

I have about 60 other IP (desk) phones deployed. Is this MLC a completely different app? I do have the licensing.

At the end of the day, it's just dial tone.

 

[PFD45]

Android:

https://play.google.com/store/search?q=nec multiline client&c=apps

iPhone:

https://itunes.apple.com/us/app/mlc-mobile/id1084843170?mt=8

There is a separate license for MLC that has to be loaded on NEC's LMS (not your LMC) but I think you get a 30 day trial.

Uploading a picture of it is easier than describing. Keep in mind this requires the ability to have NEC IP phones programmed up.