OldNortellian
Vendor
Rls 4.00.50. Digital phones pass DTMF, but IP sets (DT800) do not. This is a PRI environment. Any place Other than 84-xx to look?
Thanks in advance.
Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SV9100 IP phones not passing DTMF
- Thread starter OldNortellian
- Start date
- Status
C6corvette
Technical User
Look in the system options and service class there is a bit that needs to be turned on to pass DTMF I had the same issue found it in the rel 12 program manual
- Thread starter
- #3
OldNortellian
Vendor
I ended up finding a setting in the phones themselves that I adjusted and it started to work.
OldNortellian, can you please share what settings you changed in order to fix it
Wael
VoIP Expert
Wael
VoIP Expert
- Thread starter
- #5
OldNortellian
Vendor
There was a setting in the phone itself under maintenance, i think adjust, then audio, then DTMF. It was set at 32db at default, I moved it down to 12 and haven't had a problem since. I know once you were into the phone programming, it was 3,4,1,6 then i entered 12.
- Status
