Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

sv 9300 SIP trunk

Status
Not open for further replies.

muazali

Systems Engineer
Feb 2, 2020
1
MV
i have SV9300 PBX and configured SIP trunk . i have cisco router for NAT and connected to pbx network .

i have done all configuration but not able to make any calls.

any have configuration guide or any tips that can help.

urgent
 
you should do a wire shark or a trace on pc pro.

After you enter these commands below, look on pc pro maint and trace.
See if the number is being natted properly. you should not be sending or receiving private numbers.
did you put the global IP address? To use Nat you will need that.

08>990:0
4030>0:A-
4000>A:19-

 
hi, ctvi! what does the command 08>990:0 mean?
 
thanks, ctvi! very interesting information
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top