I recently received a Partner ACS system from a friend who has had it stored in the attic for approximately 18 months. The system works apparently, except for the fact that you can't hear ANYTHING over the static. The static is on every extension, but you can faintly hear the tone in the background. If you dial an extension it will ring that extension, but the static is there as well. It is present on all extensions on all cards - even if the Processor is the only card in the carrier there is static.
Here's my setup:
Lucent Partner ACS
1 - ACS Proc 103G4
2 - 308EC R1.0
1 - Mail VS 539C4 R4.1
Any ideas or recommendations would be greatly apreciated?
Here's my setup:
Lucent Partner ACS
1 - ACS Proc 103G4
2 - 308EC R1.0
1 - Mail VS 539C4 R4.1
Any ideas or recommendations would be greatly apreciated?