Stat virtual loops on succession 3.0?

[dmorris01]

Hey guys,
Customer has phones built on a couple of virtual loops (140 and 144) and I'm trying to stat the loops to find any unused, unequipped, etc.

LD 32
STAT 140 0 0
gives me nothing but an error.

I've done this plenty of times on later versions, customer has an 81C, Succession 3.0.
Anyone know of a different command/solution?
Thanks

 

[bigindian65]

channel at a time on Virt.

stat 140 0 0 0

stat 140 0 0 1



Mato' Was'aka

 

[bignose21]

doesn't LUU work?

LD20
REQ LUU
TYPE i2002 (any ip set type well do)

or stat card by card
LD32 stat 140 0 0

 

[bignose21]

Or on all Sig Servers do isetShow copy to a TXT file open in excel and do text to column then A-Z the TN column.

 

[bigindian65]

you can't stat vloop only tns, thanks for the isetShow though!

Mato' Was'aka

 

[dmorris01]

Yeah, LD32 stat is only working by individual unit, thanks for sigserv tip. I can definitely go 1 by 1, but I knew there had to be a better way I was overlooking. Thanks all.

 

[yyrkroon]

ld 20 luvu and enter i2002 or whatever i you're using will give you all available units

 

[pronei]

You can stat Virtual loops, I do it all the time in LD 20.

LD 20
stat 144 0 0

should work just fine and show you all 32 units.

 

[acewarlock]

dmorris01:
Quote:
LD 32
STAT 140 0 0
gives me nothing but an error.


What's the ERROR CODE?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[bigindian65]

error code is going to be:

NPR0047
"This command is not valid on virtual superloops, since virtual
superloops do not physically exist."

Mato' Was'aka

 

[acewarlock]

That's why I was asking him what the ERROR CODE was, looking it up would have told him that.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.