Speed Dial

[JP26]

Hey All Monday ugh..... anyway need some help I am new to the company and apparently they have a way where they can speed dial all the other locations in various States. I had to make a change to a number and I can not locate how this was done. From a desk phone you simple dial 3373XXX where XXX is the speed list call. Where do i make changes and or how is this working. Also is there something that needs to be changed in the cls as this doesnt work from my phone. Thanks

 

[cmawbey]

try this

http://pbxbook.com/meridian/ssc.html

 

[JP26]

Thanks however this did not help as i recieve error message like the number is not in a speed dial list

 

[GHTROUT]

Do a DNB on 3373, or 33 or just 3 if needed.

This might be CDP. You need to figure out what the 3nnn is


~~
Gene at www.GHTROUT.com

 

[JP26]

DN 33
TYPE SFP

 

[jamie2]

That is your SPRE code. You can change your SPRE code to something else. Do you have many analog users that your SPRE for functions?

 

[JP26]

I am lost. user can dial 3373XXX and the system automatically dials. Is that done by spree code? all i want to do is changeone of the XXX number has changed

 

[GHTROUT]

Don't change the SPRE cause it is not a problem. If 33 is SPRE and we know "73" is System Speed (that is the same in all CS1000s), then users are accessing a System Speed List. You just have to figure out what list.

Print your TN and some other phone that does work:

Look for the SSU Value. That is the "List Number"

Put that value on your phone

Go to LD18 and edit that list as needed.

~~
Gene at www.GHTROUT.com

 

[jamie2]

Gene, Is correct... I read your issue to quick and thought you got a SCH code when trying to input anything with DN 33xx, my bad!

 

[JP26]

Thanks all I will give it a shot in the am stay tuned...lol

 

[JP26]

ok so adding SSU 0000 works
DES 13
TN 024 1 11 09
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
FDN 8677
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 0
SCI 0
SSU 0000
now I have to update the dialing out number in 0000 this is what i am getting what am i doing wrong . like i said i dial 3373XXX where XXX is the number i need to change within the list. Thanks
ld 18
REQ chg
TYPE scl
LSNO 0000
SCH3075
LSNO

 

[cmawbey]

not to sure you can use 0000 try 0100 for instance.

 

[JP26]

Gibblett but this is an exsisiting scl not creating a new one. Unless i am not understanding you

 

[cmawbey]

ok can you print the list in LD 20

 

[JP26]

Gibblet I got it thanks brother could not have done it with out you.
To Change Regional Directory Speed Dial Outbound Number:
ld 18
SCL000
MEM AVAIL: (U/P): 49949191 USED U P: 1327551 335927 TOT: 51612669
DISK SPACE NEEDED: 503 KBYTES
REQ chg
TYPE ssc
LSNO 0000
NCOS enter >as this is already defined however if you need to change enter valid class
DNSZ enter> as this is already defined however this is Maximum number of digits in a list entry
SIZE
WRT (ADDS: MEM: 0 DISK: 0.0)yes
STOR 174 9915012449034