Spectralink 8030 and SVP server 8000 and Dlink AP

[aboola]

I have 3300 and Spectralink 8030 Wireless handset and SVP server , configure it as the manual say , but the phone give on screen no net Found and the AP mak address then 33
can any one help with that ?

 

[Supernova99]

Has the phone got the latest firmware?
Is it the same as your existing handsets?

Share what you know - Learn what you don't

 

[aboola]

yes I upgrade them to latest one

 

[Supernova99]

What type of WLAN protocol are you using WMM, CCX or CCKM?
Is the handset set to the correct type?

Share what you know - Learn what you don't

 

[aboola]

it is set to SVP server and put SVP server IP address , and I am using authentication using WPA and try WPA2 too

 

[Supernova99]

As it is a SVP what model is it as some of them have a handset limit?

Share what you know - Learn what you don't

 

[aboola]

it is SVP 8000 and I have just tow phones

 

[Supernova99]

I think you have to setup a range of alias IP addresses along with real IP addresses.

Have you added all the config files to the TFTP server with the extn numbers

slnk-cfg.cfg
sip_allusers.cfg
sip_xxxxxx.cfg


Share what you know - Learn what you don't

 

[aboola]

I will double check that

 

[aboola]

what I must use for IP addresses range? range of phones IP's?

 

[Supernova99]

They need to be in the same subnet as the real ones so they can connect to each other

Share what you know - Learn what you don't

 

[aboola]

it is in same subnet , but I keep geting the same message and can\t ping the phone at all , it is like it is refuse the AP , my AP is no on certified device list , so it is will work or not?