SOHO 97

[surfk4t]

Folks

Can anyone help?

I have been given the task of setting up a SOHO 97 for a ADSL connection.

I have been through the web management interace, and I have set it up. But I have a question.

I set up the ADSL\WAN address with a Static Address, and then I set the LAN address of the SOHO97 with a Static address on the same subnet as the ADSL\WAN interface. The CRWS web access seemed to accept this. But when I went to the Console Screen and tried to change the LAN IP address to another one, on the same Subnet as the ADSL\WAN interface, it came up with an error and refused!

I am using the SOHO97 as a ADSL modem, rather than a router, as the LAN side is connected to a SonicWall Firewall, which has a Static IP.

WAN LAN
195.32.46.54 ---- SOHO 97------195.32.46.55 255.255.255.0
255.255.255.0 |
|
|
195.32.46.56 (wan)
|
Sonicwall
|
10.10.10.1

I hope the above makes sense.

Can anyone help?


Cheers

Bert

 

[computerhighguy]

you will want to use an IP unnumbered for the LAN interface.

It should look something like this (assuming that the ADSL interface is adsl 0).

Interface fastethernet 0
IP unnummbered ADSL 0


To simplify this, it basically bridges the two interfaces, and give the unit 1 IP address.


It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)

 

[surfk4t]

computerhighguy

Thanks for the response.

One other question how do I create the above?

Bert

 

[computerhighguy]

Do me a favor and post your config (minus routable IP addresses) so we can see what you are trying to do, and I will give you the commands and any recommendations.


It is what it is!!
__________________________________
A+, Net+, I-Net+, Certified Web Master, MCP, MCSA, MCSE, CCNA, CCDA, and few others (I got bored one day)

 

[surfk4t]

computerhighguy

Sorry for the delay, I have gone home now. To see if a Ican do a basic connection to the internet.

I am having trouble getting the CRWS, to do what I want.

I am getting a error saying my password for the ADSL connection is wrong. Its not!

Any ideas for a basic connection to ADSL using PPOA?

Thanks for the response.


Bert

 

[surfk4t]

computerhighguy,

Hi, I got the router to work on my own ADSL circuit last night. But could not check the correct setup as I do not have enough Static IP addresses.

Here is the config, as per the CRWS.

Having looked on the Cisco site, they mention about using the Cisco as a bridge, but the internet company is using DHCP on the WAN side of the CISCO, so the LAN side will have the static, and the Firewall will have another static address in the same subnet.

Do you think this should work? I have made sure the Cisco does not use NATS and the Firewall on the Cisco is switched off.

Admin#sh conf
Using 1356 out of 131072 bytes
!
version 12.3
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Admin
!
no logging buffered
enable secret 5 *********
!
username Admin password ************
ip subnet-zero
!
!
no aaa new-model
!
!
!
!
!
!
!
interface Ethernet0
description CRWS Generated text. Please do not delete this:195.72.115.170-255.2


55.255.248
ip address 195.72.62.62 255.255.255
ip address 10.10.10.1 255.255.255.0
no ip mroute-cache
hold-queue 100 out
!
interface ATM0
no ip address
no ip mroute-cache
atm vc-per-vp 64
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
dsl operating-mode auto
!
interface Dialer1
ip address negotiated
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname adv.net@adsl.y
ppp chap password 7 0832595E19161703
ppp pap sent-username adv.net@adsl.y
ppp pap sent-username adv.net@adsl.y
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
no ip http secure-server
!
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 120 0
no modem enable
stopbits 1
line aux 0
transport input all
line vty 0 4
exec-timeout 120 0
login local
length 0
!
scheduler max-task-time 5000
!
end