One more quick question - so if I have manager software version 8.0 (Part of the V6 admin software) It says that I can upgrade to V6 when I go to file, advanced, upgrade.
Will it allow me to do this upgrade, or will the system crash when I attempt it?
A 406v2 (must be PCS08 or higher, must have 64Mb memory) can go up to 6.1 max
BUT, 6.0 and 6.1 do require a license!
5.0 is the last free upgrade you can use on the 406.
If your 406v2 is already on R4.2, it will have enough memory to go up to R6.1 R5.0(26) is the max you can go without a license, You will then get to run 16xx phones too!
R6, R6.1 will need an upgrade license, also endpoint licensing has changed for IP phones. You may need to purchase endpoint licences also depending on how many IP Phones, and VCMs you have.
Note: You will not be able to run 96xx phones on 406v2, even on R6 & R6.1!
With the exception of the upgrade license.
If you try to purchase a specific license as an example, for a ccc agent license you ont be able to and you will have to upgrade.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.