I'm upgrading a CS1000 Rls 4 to Rls 7. I can't get to migrate the customer data. I did an archive of the old system and copied it to the USB installation device. However the system does not see the archive as valid. I would really like to upgrade the database because I don't want to reprogram the system from scratch. Can anyone help?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Software Migration
- Thread starter gooddy
- Start date
- Thread starter
- #3
- Thread starter
- #4
USB ?
What type of Call Processors are you using on the new 7.0 system? If you did an archive from LD 143 to a PCMCIA compact flash, then you would use that to install the database and on bootup it should say CONVERTING/or something to that effect.
if it's a CPPM then you just slot the Compact flash on the face plate when it asks for the database.
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
What type of Call Processors are you using on the new 7.0 system? If you did an archive from LD 143 to a PCMCIA compact flash, then you would use that to install the database and on bootup it should say CONVERTING/or something to that effect.
if it's a CPPM then you just slot the Compact flash on the face plate when it asks for the database.
__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
- Status
Similar threads
- Locked
- Question
- Locked
- Question