Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SNMP Traps version 1

Status
Not open for further replies.

MichalPol

Technical User
Oct 26, 2006
20
US
Hi,
Have anyone know how to change version of the snmp traps. Currently my Avaya Media server S8720 is sending out snmp traps version v2c but I need to change it version 1.

Many thanks for advises!
MichalPol1
 
I don't have a CM in front of me, but I think I can get close enough for you to make your change:
+ use the Web interface to the S8720
+ login
+ use the Maintenance link
+ there are two snmp buttons (snmp agent and snmp traps), choose "snmp-traps"
+ change "master agent status" to "down"
+ click "version 1" (unclick "version 2c")
+ change/add ip address of trap receiver if necessary
+ change "master agent status" to "up"

done

steve
 
Hi Steve,

I did it alredy but once I am logged in shell of the server and I type command:

"almsnmpconf"

then I see it is still snmp version v2c.

Any idea why there are differences between Web interface and shell?

Regards,
MichalPol
 
Are you sure you brought the "master agent" down & back up?
At shell level type ps -ef|grep snmptrap
Is the start time the time you made the Web changes?

steve
 
Hi Steve,

Unfortunatelly i can not check due to my access level to unix system so I have to ask avaya engineer to change version of snmp traps but many thansk anyway for support.

regards,
MichalPol
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top