SLC24 and base station issue

[tecnouser]

Hi all,

I have an SLC24 installed in an OS4K V7 R1.39.0, the card in ready in the dis-bcsu and light green but the BS5 don't come up and keep resetting, I already tried a BS4 but noway; same issue.
The latest loadware available in SEBA has been loaded, so if anyone have the thinest clue , please share it .

Thank you
Tecnouser

 

[sbcsu]

Use the latest CAT Tool
Use the CAT 7.0
Cordless/Modules and BaseStations/ BS Ports Overview
Ensure all Ports required are ticked to show 'in use'

 

[tecnouser]

Thank you SBCSU,

I'm using the CAT 7.0.18, but I will install the latest CATool and let you know.

Tecnouser

 

[sbcsu]

Also please check the obvious.
Wiring of base stations - wire from left to right - ignore the first screw connector on the left.
Use a pair from the first 16 pairs on the next 2 screw down connectors for 4 simultaneous conversations.
Use a pair from either the first 16 or last 8 to run 4 extra possible conversations on the next 2 screw down connectors.
Use a pair from either the first 16 or last 8 to run 4 extra possible conversations on the next 2 screw down connectors.
Ignore the last screw down connector on the right hand side.

 

[sbcsu]

Is this a DECT upgrade from a previous version or a new fresh install

 

[tecnouser]

Hi SBCSU,

Yes this is a fresh new install, anyway when you said to check the obvious you been definitely Right why: because it turn to be an MDF labeling problem , we been cabling the BS5 in an SLMO position that's why the base station keep reseting,
So this is for the next field tshooting

Thank you
Tecnouser

 

[sbcsu]

Hi Tecnouser,
Yes it happens to us all...
If I am ever having problems like that I like to setup a single new base station straight off the cable to see what is happening.
At least you have it sorted out now.