Lectrician
Technical User
Hi.
After reading through the post here: I was wondering if you could also help me?
I have a single SIP trunk to evaluate, and have tried to set it up using the information from the supplier. I can make outbound calls, but they cut off after 12 seconds. No incoming calls come in - The number is engaged. The provider says my system is not registering with the SIP trunk.
I have followed this setup guide:
This is my first attempt at SIP trunking :-/
Thanks.
EDIT:
I have made a couple changes, ignoring 10-23 completely. Inbound calls now work. Outbound calls still terminate after 12 seconds though?
Ta!!
After reading through the post here: I was wondering if you could also help me?
I have a single SIP trunk to evaluate, and have tried to set it up using the information from the supplier. I can make outbound calls, but they cut off after 12 seconds. No incoming calls come in - The number is engaged. The provider says my system is not registering with the SIP trunk.
I have followed this setup guide:
This is my first attempt at SIP trunking :-/
Thanks.
EDIT:
I have made a couple changes, ignoring 10-23 completely. Inbound calls now work. Outbound calls still terminate after 12 seconds though?
Ta!!