Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP trunks

Status
Not open for further replies.

Zeknop

Programmer
Sep 10, 2013
9
US
Anyone ever set up SIP trunks with an IPO 500v2? Trying to get them set up but can't seem to ge them to register
 
Plenty without a problem. What is your setup? Did you monitor the registration process?
 
with your set up were you using a SBC? I'm very new with the IPO, how do I monitor the registration process
 
We never install SBC, if a customer wants it then he has to call a specialist on the matter.
There is a tool called Monitor which can be used to monitor about anything including SIP connections.
If you are not at least a bit familiar with IP Office then find some on site help from someone who has the knowledge, trying to learn it via this site is a bad idea.
 
There is no need for a SBC in most cases, it just complicates matters and adds cost to using SIP ...which is intended to reduce costs :)



"No problem monkey socks
 
I am somewhat familiar with the IPO and I'm working with a couple of guy that kbow it well. They just havent set up SIP trunks yet. The only puopose of the SBG is to give us traffic shaping to control the bandwidth
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top