Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP trunking and "route to" commands

Status
Not open for further replies.

Telecomgal1

Technical User
Nov 30, 2006
10
US
We are utilizing Unified Messaging through SIP trunking and hunt groups. If someone calls an extension it will go to their UM account no problem if they do not answer. But if we use "route to" command in a vdn, it will not got to their account if they do not answer. It goes to the top of the tree. After tracing the call, it seems that it is still routing based on the original caller ID instead of "route to" extension. If we use an audio codes box it works fine, but we do not have an audio codes box at each site. Any ideas?
 
Try chaning your route to step in the vecto from with coverage n to with coverage y.

example: route-to number 2222 with cov y if unconditionally
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top