Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIP trunk through Voxitas
- Thread starter acadacom
- Start date
hairlessupportmonkey
IS-IT--Management
turn off any SIP / VoIP transforms, run STUN on the IPO if needed, and use a public STUN server as the one on the IPO no longer works.
ACSS - SME
General Geek
ACSS - SME
General Geek
- Thread starter
- #3
hairlessupportmonkey
IS-IT--Management
obi wan kenobi - "use the search luke."
ACSS - SME
General Geek
ACSS - SME
General Geek
- Thread starter
- #5
RogerTurboFederer
Technical User
@ acadacom
There´re application notes on support site for supported SIP providers. Check one as a reference.
There´re application notes on support site for supported SIP providers. Check one as a reference.
RogerTurboFederer
Technical User
Or check the post SIP twinning by BlueRiver31, he was able to make it work.
BlueRiver31
IS-IT--Management
Acadacom,
They had me set the firwall type to open internet. Are you able to register with Voxitas? Can you receive calls or make calls?
They had me set the firwall type to open internet. Are you able to register with Voxitas? Can you receive calls or make calls?
- Thread starter
- #9
BlueRiver31
IS-IT--Management
I am using 69.90.168.13. I don't think they use stun though. What firmware version are you on?
- Thread starter
- #11
we are on 6.0.8 but we are upgrading to 7.0 tomorrow. Im begining to think my sonicwall is blocking the ports. I created a route for the two but did not open any ports. not that familiar with sonicwall, so looking into that now. and I confurmed that they do not use stun today.
What model Sonicwall?
1. Enable SIP Transformations on the Sonicwall.
1b. Reboot the Sonicwall.
2. Set the IP Office to either Open Internet OR Blocking (try both). For Public IP put 0.0.0.0. For Public port put 5060.
3. Make sure you have the correct IP Route set up on the IP Office.
If you need a stun server, try stun.sipgate.net on port 10000
1. Enable SIP Transformations on the Sonicwall.
1b. Reboot the Sonicwall.
2. Set the IP Office to either Open Internet OR Blocking (try both). For Public IP put 0.0.0.0. For Public port put 5060.
3. Make sure you have the correct IP Route set up on the IP Office.
If you need a stun server, try stun.sipgate.net on port 10000
- Thread starter
- #13
model tz210
1. Enable SIP Transformations on the Sonicwall.
1b. Reboot the Sonicwall.
done
2. Set the IP Office to either Open Internet OR Blocking (try both). For Public IP put 0.0.0.0. For Public port put 5060.
tried both
3. Make sure you have the correct IP Route set up on the IP Office.
correct
If you need a stun server, try stun.sipgate.net on port 10000
stun server not needed per voxitas
how do i verify ports are open on firewall?
1. Enable SIP Transformations on the Sonicwall.
1b. Reboot the Sonicwall.
done
2. Set the IP Office to either Open Internet OR Blocking (try both). For Public IP put 0.0.0.0. For Public port put 5060.
tried both
3. Make sure you have the correct IP Route set up on the IP Office.
correct
If you need a stun server, try stun.sipgate.net on port 10000
stun server not needed per voxitas
how do i verify ports are open on firewall?
You want to be sure the latest firmware is on the Sonicwall. Sonicwall's had a problem with SIP for years. With SIP transformations turned on, you do not need to open any ports.
The latest TZ210 firmware is: 5.8.1.0.
In Sysmon do you see the SIP packets being sent and received (TX and RX)?
Are you using SIP Registration or IP Authentication?
The latest TZ210 firmware is: 5.8.1.0.
In Sysmon do you see the SIP packets being sent and received (TX and RX)?
Are you using SIP Registration or IP Authentication?
- Thread starter
- #15
Do you have an IP route in the IPO 0.0.0.0/0.0.0.0/x.x.x.x router addres?
Use the SystemStatus > IP route to ping from LAN1/2 to the IP of you SIP provider.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
Use the SystemStatus > IP route to ping from LAN1/2 to the IP of you SIP provider.
___________________________________________
It works! Now if only I could remember what I did...
Dain Bramaged (Avaya Search tool )
______________________________________
amriddle01
Programmer
- Thread starter
- #18
Can you post some screen shots of your SIP config on the IPO? Use a site like imageshack or photobucket.
If you are not seeing any TX packets for SIP in SysMon, than your IPO is not attempting to register. Even if the Sonicwall was blocking all outbound traffic, your IPO would just keep trying to TX registration packets.
If you are not seeing any TX packets for SIP in SysMon, than your IPO is not attempting to register. Even if the Sonicwall was blocking all outbound traffic, your IPO would just keep trying to TX registration packets.
- Status