We have an Avaya 8710 running CM7. We want to ditch a PRI circuit and switch to SIP trunking. The switch is IP capable. We have have an IPSI installed and running VoIP through the switch. Can it handle SIP trunks? I hope I gave enough information as I don't know what is needed for a SIP trunk yet. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIP Trunk on CM7... Can it be done?
- Thread starter snajo
- Start date
- Thread starter
- #3
Before you get too far down the road, check to make sure you have SIP trunk licenses in system-parameters customer-options. With that said, you have received some wise counsel to not expose your switch to your provider's SBC. You really should have System and Session managers and your own SBC. Without them you will be limited on what you can manipulate in your SIP traffic and will be trusting your provider to protect you. You might also struggle during initial setup and future troubleshooting because of CM's list trace feature not being as good as ASM's traceSM/traceSBC. If all of the above aligns for you, there's no other technical reason it won't work.
We're all ignorant, just in different subjects.
We're all ignorant, just in different subjects.
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question