Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Trunk Between IP Office 7.0

Status
Not open for further replies.

smithaura

Technical User
Oct 21, 2011
39
Hello

We are having two Location Offices , Office A (HQ ) IP 500 V2 7.0 with 120 IP Users & Office B IP 500 V2 7.0 with 40 Users ,

Also both the system has got SIP Trunk Licenses

Can we do the SIP trunks between two IPO 500 V2 Using the Pulic IP ( Internet)?

i am thinking this is not possible

Thanks in advance
 
Yes, you can, but it is very, very, very much unsecure. It's the same of leave open the doors of you home.

Make this whith a IP-SEC/VPN like minimun....





Regards!
Djmtrar
 
Thanks a lot Djmtrar

Please give me some basic tips to set up the same,

I understad it is not secured,once it is tested i can tell my boss to atleast go for VPN

Thanks for your help
 
Don't do it at all without a VPN tunnel in between.


BAZINGA!

I'm not insane, my mother had me tested!
 
Tell your boss no and that you'll need a proper data connection between them to achieve this. Otherwise just ring each site using the PSTN.

And once you have that, why use SIP??? Use H323 and SCN to get more features!

Jamie Green

Football is not a matter of life and death-It is far more important!!!!
 
Sorry. Do not get me wrong. That is crazy. If you do not know how to do it without VPN, it would be irresponsible on my part, explain how to.

It would be like suicide help.

Do it within a VPN such as commented by the other colleagues.
 
It's not like a VPN costs anything or takes long to do, there is no reason not to :)

NTE-wave-logo-for-a4-header.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top