Sip trunk between 2 nec is it possible to use analog trunk from each other. Step by step please if aavailable. I have one sv9100 and one sl1000. I can call each other both have analog trunks but i want to use analog trunks from each other is it possible? Thank u for your help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sip trunk between 2 nec is it possible to use analog trunk from each other
- Thread starter eliehelou
- Start date
belevedere
Instructor
Connect analog trunk to SLT port to one and the same to the other. It's refered to as an OPX line. To call across you dial the SLT port extension number.
- Thread starter
- #3
belevedere
Instructor
You are talking about an OPX line. At that distance it will require a path from your CO provider.
quazimotto
Programmer
I believe what he wants is a different dial-out code, say 8, which would prompt the box to connect to a co line at the remote end.??
- Thread starter
- #6
yes this is possible
-check trunk to trunk transfer on program 14-01-01.
- make a DID translation table for your trunk group access code + trunk group number.
for exp recieve number= 200
target number= 8041
So when i dial 200 on ill get the trunk group 1 other system.
-check trunk to trunk transfer on program 14-01-01.
- make a DID translation table for your trunk group access code + trunk group number.
for exp recieve number= 200
target number= 8041
So when i dial 200 on ill get the trunk group 1 other system.
- Status