Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP Trunk -- Avaya IPO 500 V2

Status
Not open for further replies.

Irshad78

IS-IT--Management
May 16, 2016
110
SA
Team,

I have 2 SIP Trunks "Primary & Backup" for our Call Center Environment with Avaya IPO 500 V2 version 10.1, can i connect them both to a Router, instead of connecting directly to WAN port of IPO.
 
SIP Provider is providing Backup Trunk over microwave PTMP and this will be active only if primary fails and will have different IP, how can i complete this setup.
 
I am attaching Topology

SIP_Failover_u8cd5s.jpg
 
I assume you need to present different external IPs depending on which trunk you're using.

Preferably you would use a SBC for this, otherwise this could be accomplished if you use LAN1 for one trunk and LAN2 for the other.

"Trying is the first step to failure..." - Homer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top