Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SIP problem on 3300

Status
Not open for further replies.

cordas

Technical User
Mar 22, 2007
13
PT
I have a 3300 with 7.1 and SIP configured, I can see in the logs that the 3300 can talk with the SIP Proxy and register but when I place a call I get:

Log Type: Maintenance
Log Number: 4830
Severity: Warning
Date: 2007/Mar/22
Time: 12:06:10
Source: SIP_SSM_APP
Description: Authentication failure - 403 received Recent failure count 1 in last 0 seconds Total failure count 52 Type of call : Outgoing Route 7 Link NetCall_1 From 192.168.2.210 To NetCall
Module: SIP_SSM_APP
File Name and Line Number: MaintenanceLog;0

What type of Authentication is this, because all the authentication is done by the 3300 and not when a call is placed. The SIP operator tells me that they don't receive any call invite and that the 3300 is registered, but I keep getting this error.

This was already working and stopped working last week without any changes on the configuration. Could it be a forced reboot caused by a power outage that caused this?

Best regards,

Rui Cordeiro
 
I am having the same issue as well.

Log Type: Maintenance
Log Number: 1395
Severity: Warning
Date: 2007/Aug/20
Time: 15:20:45
Source: SIP_SSM_APP
Description: Authentication failure - 403 received Recent failure count 10 in last 3 seconds Total failure count 360 Type of call : Outgoing Route 2 Link Exchange From voip.greenvilleisd.com To Exchange
Module: SIP_SSM_APP
File Name and Line Number: MaintenanceLog;0
 
Hi,

I solved this changing a option in the SIP authentication. My SIP provider changed the way they did the authentication and the system stop to authenticate, changing that option allow everything to work again.
Unfortunately I don't remember that option (it was some months ago...) but I'm sure it's something on the SIP config (maybe a check box).

Regards,

Rui Cordeiro
 
On the Mitel side, I remember it's just a check box, but I don't remember the correct one... sorry.

Regards

RC
 
You should not require authenication on the Mitel side, as long as your input the IP address (gateway) on the Exchange side.
 
I had the same problem on site last week, i removed the authentication and it started to work again. Try removing and see how far you get?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top