Bonker1974
Technical User
Hi All,
I have an Issue I can't get my Entity link between the session manager and the CM to come up. The SIg group is up and the trunks are in service but the TCP link will not come up.
CM 7.0
SMGR 7.1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SIP Enity Link
- Thread starter Bonker1974
- Start date
- Status
Hi All,
I have an Issue I can't get my Entity link between the session manager and the CM to come up. The SIg group is up and the trunks are in service but the TCP link will not come up.
CM 7.0
SMGR 7.1
Look at the flows on that traces you posted on the 13th. There are no OPTIONS messages flowing from the SM toward the direction of the CM. Only the 200 OK response flows towards the CM. That isn't correct behavior. It's backwards of what it should be. Double check your IP addressing in the entity set ups. And I mean down all the way to terminal connect to the Linux and run ifconfig to validate the underlying structure too. You have something majorly wrong with an address or two somewhere.
Plus from that same day you have a screen cap from SMGR that appears to show the SM built as an entity. You don't do that. You build the SM. Then you build entities for the SM to link to. You might be confusing things all to heck and causing recursive routing with that one.
Plus from that same day you have a screen cap from SMGR that appears to show the SM built as an entity. You don't do that. You build the SM. Then you build entities for the SM to link to. You might be confusing things all to heck and causing recursive routing with that one.
- Status
Similar threads
- Question