Siemens hipath 3750 instaling second SLC16N board 1

[Cosmin.ion]

I”m having this problem. i have a Siemens HiPath 3750 with a SLC16 card and 10 BS2/2 receivers. I installed a second SLC16N card and 4 bs2/2 receivers. when i use a DECt phone registered to the first SLC16 board near a bs2 receiver connected to the the second SLC16 board it has signal but i can t make or receive calls. what changes do i need to make in hipath 3000 manager E so the cards communicate one with the other. i put pictures. Thanks

1 , 2, 3, 4

 

[cody64]

Hi,

Have you set them up in the dect settings? Each has to have the same node id but different slc-no.

Each card also has to have a call number as my understanding is it uses that to direct the call between the cards.

C64

 

[masviss]

You need to load the same database(LASTLOAD.KDS) into each SLC board.
In picture 3.png "Read from CDB" - Multi-KDS

 

[Cosmin.ion]

Thank you cody64. your solution worked. The 2 boars communicate with each other and every thing is like one system.