Siemens Hi Path 4000 Version4 SIP Trunk Issue

[Chinzko]

We`re using Siemens Hi Path 4000 Version4 and we have tried to configure SIP Trunk on STMI4 IP module for the first time. The SIP is registering ok but when we try to make call its failing. Currently we`re using 1 E1 but we want to use SIP for incoming and outgoing call, how do we do that?

 

[sbcsu]

BUEND
TDCSU
RICHT
LODR
LDAT
LDPLN

Do the above in that order for the SIP trunk

 

[Chinzko]

Dear Sbcsu,
Thank you for answer. I'm sorry for long delay.
The configurations are made as follows, but its not working.

DIS-BUEND:75,L;
H500: AMO BUEND STARTED

+------------------------------- FORMAT = L -----------------------------------+
| TGRP NUMBER : 75 TGRP NAME : MOBI SIP MAXIMUM NO. : 40 |
| CHARCON : NEUTRAL |
| SUBGROUP NO.: 8 DEVICE TYPE : HG3550IP TRACENO : 0 |
| SEARCH MODE : DESCENDING ACD THRESHOLD : * |
| NUMBER OF ASSOCIATED ROUTES : 1 PRIORITY : 1 |
| TDDRFLAG : ON TDDRTHRESHOLD: 3 SOURCEGROUPIDX : 1 |
| GDTRRULE : 0 ACDPMGRP : 0 |
| THE FOLLOWING TRUNKS (LTG-LTU-SLOT-CCT) HAVE BEEN ALLOCATED: |
+------------------------------------------------------------------------------+
| 1- 6-103-0 1 | 1- 6-103-0 2 | 1- 6-103-0 3 |
| 1- 6-103-0 4 | 1- 6-103-0 5 | 1- 6-103-0 6 |
| 1- 6-103-0 7 | 1- 6-103-0 8 | 1- 6-103-0 9 |
| 1- 6-103-0 10 | 1- 6-103-0 11 | 1- 6-103-0 12 |
| 1- 6-103-0 13 | 1- 6-103-0 14 | 1- 6-103-0 15 |
| 1- 6-103-0 16 | 1- 6-103-0 17 | 1- 6-103-0 18 |
| 1- 6-103-0 19 | 1- 6-103-0 20 | 1- 6-103-1 1 |
| 1- 6-103-1 2 | 1- 6-103-1 3 | 1- 6-103-1 4 |
| 1- 6-103-1 5 | 1- 6-103-1 6 | 1- 6-103-1 7 |
| 1- 6-103-1 8 | 1- 6-103-1 9 | 1- 6-103-1 10 |
| 1- 6-103-1 11 | 1- 6-103-1 12 | 1- 6-103-1 13 |
| 1- 6-103-1 14 | 1- 6-103-1 15 | 1- 6-103-1 16 |
| 1- 6-103-1 17 | 1- 6-103-1 18 | 1- 6-103-1 19 |
| 1- 6-103-1 20 | | |
+------------------------------------------------------------------------------+

AMO-BUEND-111 TRUNK GROUP
DISPLAY COMPLETED;
<
<dis-tdcsu:1-6-103;
DIS-TDCSU:1-6-103;
H500: AMO TDCSU STARTED

DIGITAL TRUNKS (FORMAT=S)
DEVICE PEN BCGR B-CHANNEL TGRP CCT
--------------------------------------------------------
HG3550IP 1-06-103-0 1 1 && 20 75 1
HG3550IP 1-06-103-1 1 1 && 20 75 1
--------------------------------------------------------
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 40

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;
<
DIS-TDCSU:1-6-103,,,,,L;
H500: AMO TDCSU STARTED
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = HG3550IP PEN = 1-06-103-0 TGRP = 75 |
|---------------------------------------------------------------------------|
| PROTVAR = ECMAV2 INS = Y SRCHMODE = DSC |
| COTNO = 4 COPNO = 4 DPLN = 0 |
| ITR = 0 COS = 1 LCOSV = 1 |
| LCOSD = 1 CCT = 1 DESTNO = 0 |
| SEGMENT = 8 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = TIE |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = 1 -1 -18 |
| ALARMNO = 0 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 4 FWDX = 10 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = |
| TCCID = MOBI SIP SECLEVEL = SECURE |
|---------------------------------------------------------------------------|
| BCNEG = Y BCGR = 1 LWPAR = 2 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = N DMCSEC = N VNNO = |
| SVCDOM = |
| BCHAN = 1 && 20 |
| |
+---------------------------------------------------------------------------+
+------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+
| DEV = HG3550IP PEN = 1-06-103-1 TGRP = 75 |
|---------------------------------------------------------------------------|
| PROTVAR = ECMAV2 INS = Y SRCHMODE = DSC |
| COTNO = 4 COPNO = 4 DPLN = 0 |
| ITR = 0 COS = 1 LCOSV = 1 |
| LCOSD = 1 CCT = 1 DESTNO = 0 |
| SEGMENT = 8 DEDSCC = DEDSVC = NONE |
| FACILITY = DITIDX = SRTIDX = |
| TRTBL = GDTR SIDANI = N ATNTYP = TIE |
| CBMATTR = NONE NWMUXTIM = 10 TCHARG = N |
| SUPPRESS = 0 DGTPR = CHIMAP = N |
| ISDNIP = ISDNNP = |
| PNPL2P = PNPL1P = PNPAC = |
| TRACOUNT = 31 SATCOUNT = MANY NNO = 1 -1 -18 |
| ALARMNO = 0 FIDX = 1 CARRIER = 1 |
| ZONE = EMPTY COTX = 4 FWDX = 10 |
| DOMTYPE = DOMAINNO = TPROFNO = |
| INIGHT = CCHDL = |
| UUSCCX = 16 UUSCCY = 8 FNIDX = 1 |
| CLASSMRK = EC & G711 & G729AOPT SRCGRP = |
| TCCID = MOBI SIP SECLEVEL = SECURE |
|---------------------------------------------------------------------------|
| BCNEG = Y BCGR = 1 LWPAR = 2 |
| LWPP = 0 LWLT = 0 LWPS = 0 |
| LWR1 = 0 LWR2 = 0 |
| DMCALLWD = N DMCSEC = N VNNO = |
| SVCDOM = |
| BCHAN = 1 && 20 |
| |
+---------------------------------------------------------------------------+
AMOUNT OF B-CHANNELS IN THIS DISPLAY-OUTPUT: 40

AMO-TDCSU-111 DIGITAL TRUNKS
DISPLAY COMPLETED;
<

DIS-RICHT:LRTE,75;
H500: AMO RICHT STARTED
+-----------------------------------------------------------------+
| LRTE = 75 NAME = SIP MOBI (NEUTRAL) LSVC = ALL |
| DNNO =1 -1 -18 PDNNO = 0 |
| ROUTOPT = NO REROUT = NO PLB = YES FWDBL = NO |
| DTMFCNV = FIX DTMFDSP = WITHOUT DTMFTEXT = |
| DTMFPULS = PP300 BUGS = LIN ROUTATT = YES MAINGRP = 19 |
| EMCYRTT = NO CONFTONE = NO RERINGRP = NO RTENO = 19 |
| INFO = SIP |
| NOPRCFWD = NO |
| NITO = NO |
| CLNAMEDL = NO |
| FWDSWTCH = NO |
| LINFEMER = NO |
| NOINTRTE = NO |
+-----------------------------------------------------------------+
| TGRP = 75 LDAT MOBI SIP (NEUTRAL) SUBGROUP = 8 |
+-----------------------------------------------------------------+

AMO-RICHT-111 TRUNK ROUTING
DISPLAY COMPLETED;





<DIS-LODR:
ODR = 757
INFOPAT = ;
DIS-LODR:757,;
H500: AMO LODR STARTED
+-------------------------------------------------------+
| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 757 * | 1 OUTPULSE 75779982 |
| | 2 ECHO 2 |
| | 3 END |
| +----------------------------------------------+
| | * = READY FOR USE BY AMO LDAT |
+--------+----------------------------------------------+
H03: THE NEXT FREE ODR IS 1

AMO-LODR -111 ADMINISTRATION OF LCR OUTDIAL RULES
DISPLAY COMPLETED;
<DIS-LODR:75
INFOPAT =
FORMAT = ;
DIS-LODR:75,,;
H500: AMO LODR STARTED
+-------------------------------------------------------+
| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 75 * | 1 NPI ISDN |
| | 2 TON UNKNOWN |
| | 3 ECHO 2 |
| | 4 END |
| +----------------------------------------------+
| | * = READY FOR USE BY AMO LDAT |
+--------+----------------------------------------------+
|INFO:SIP MOBI |
+-------------------------------------------------------+
H03: THE NEXT FREE ODR IS 1

AMO-LODR -111 ADMINISTRATION OF LCR OUTDIAL RULES
DISPLAY COMPLETED;

DIS-LDAT:LCR,,,75,;
H500: AMO LDAT STARTED
+------------------------------------------------------------------------------+
| LROUTE = 75 LDPLN NAME = SIP MOBI SERVICE = ALL |
| TYPE = LCR DNNO OF ROUTE = 1 -1 -18 |
| SERVICE INFO = |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| | | | | | SCHEDULE | CARRIER | | | |
|LRTEL | LVAL|TGRP | ODR|LAUTH| ABCDEFGH | ZONE| LATTR | LDSRT|COTIDX |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| 1| 1| 75| 9| 1 | ******** | 1 EMPTY| WCHREG | | 0 |
| | | | | PUBNUM | | |
| | DNNO = 1 -1 -18 |
+------------------------------------------------------------------------------+

AMO-LDAT -111 LCR-DIRECTIONS


DIS-LDPLN:LDP,,,,,75,,,;
H500: AMO LDPLN STARTED
+--------------+-------------------------------------------------+
| | |
| DIPLNUM: 0| |
| LDPNO : 316| LDP : 953445-XX |
| | SPC : 22 |
| | FDSFIELD : 0 SDSFIELD : 0 PINDP : N |
+------+-------+-------------------------------------------------+
| DPLN | LROUTE| LAUTH |
|------+-------+-------------------------------------------------+
| 0 | 75 | 14 |
| 1 | 75 | 14 |
| 2 | 75 | 14 |
| 3 | 75 | 14 |
| 4 | 75 | 14 |
| 5 | 75 | 14 |
| 6 | 75 | 14 |
| 7 | 75 | 14 |
| 8 | 75 | 14 |
| 9 | 75 | 14 |
| 10 | 75 | 14 |
| 11 | 75 | 14 |
| 12 | 75 | 14 |
| 13 | 75 | 14 |
| 14 | 75 | 14 |
| 15 | 75 | 14 |
+--------------+-------------------------------------------------+
| | |
| DIPLNUM: 0| |
| LDPNO : 126| LDP : #75-W-Z |
| | SPC : 22 |
| | FDSFIELD : 0 SDSFIELD : 0 PINDP : N |
+------+-------+-------------------------------------------------+
| DPLN | LROUTE| LAUTH |
|------+-------+-------------------------------------------------+
| 0 | 75 | 14 |
| 1 | 75 | 14 |
| 2 | 75 | 14 |
| 3 | 75 | 14 |
| 4 | 75 | 14 |
| 5 | 75 | 14 |
| 6 | 75 | 14 |
| 7 | 75 | 14 |
| 8 | 75 | 14 |
| 9 | 75 | 14 |
| 10 | 75 | 14 |
| 11 | 75 | 14 |
| 12 | 75 | 14 |
| 13 | 75 | 14 |
| 14 | 75 | 14 |
| 15 | 75 | 14 |
+------+-------+-------------------------------------------------+

AMO-LDPLN-111 ADMINISTRATION LCR DIALPLAN
DISPLAY COMPLETED;

 

[sbcsu]

Hi
In both LDAT's you are using LODR 9
which is not shown.

Examine the LODR 9 and change it as required.

In the LDPLN if you put in W
That is counted as one place in LODR

 

[Chinzko]

This is LODR9 configuration.

IS-LODR:9;
H500: AMO LODR STARTED
+-------------------------------------------------------+
| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 9 | 1 ECHOALL |
| | 2 END |
+--------+----------------------------------------------+
|INFO:R2 GOROD |
+-------------------------------------------------------+
H03: THE NEXT FREE ODR IS 1

AMO-LODR -111 ADMINISTRATION OF LCR OUTDIAL RULES
DISPLAY COMPLETED;
<

 

[sbcsu]

What numbers are supposed to go out to line ?
If it is 953445-XX then you need an LODR that says ECHO 1, ECHO 2, END
If it is going to be #75-W-Z and you only want to send the Z digits then the LODR would be ECHO 3, END.

 

[Moriendi]

It's V4. Where is the CGWB config ? dis-cgwb for 1-6-103.

If you change your AMO output to "Courier New" font, it won't look like a mess when you paste it in.

Also a quick LAN trace to show which side of the STMI your problem is would be helpful. Does the invite reach the far end and is refused, or does it not even send it? LAN trace will tell you.

 

[donb01]

You can also use the Code tool before you paste and it will leave your text untouched. The Code tool is near the right side of all the little icons above the reply box and looks like a white piece of paper with a baby blue <> on it. Choose that, then press OK for language, and then it will create a tag in the reply window. All you have to do at that point is hit Paste (Ctrl-V) and your text will come up inside a highlighted box....

This text has been entered into a Code box.....

Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[eniyamath]

R U want to use SIP with service provider
in which country and which service provider.
because in some countries there are some issues with voice.
Explain it clearly.
we in saudi arabia tried a lot and not working .
After we use the profile from other country service provider and it start working.
Thanks

 

[Chinzko]

Hi Eniyamath

We are from Mongolia. Our service provider is Mobicom.

Thanks
Chinzko

 

[eniyamath]

Is the MOBICOM profile is available in Sip trunk profile (STMI4 Module).

 

[Chinzko]

I have installed on STMI4 Module SIP trunk already. Module has been registered.

 

[gan3o]

Hello guys!

I am from MOBICOM provider side of this issue. This our customers Siemens Hi Path 4000 pbx register to our proxy server by sip trunk using +97675779982 sip account number. Registration was successful but outbound calls rejected. From the trace i can see that Siemens sending sip INVITE message in wrong format. On the INVITE message from uri field was pbx local extension number like <sip:71414@mobileoffice.mn>.

INVITE sip:95344523@202.131.248.20:5090 SIP/2.0
Via: SIP/2.0/UDP 172.16.20.6:5060;rport;branch=z9hG4bK569003adaf4379036.6c78d6ddc57b78def
Route: <sip:202.131.248.20:5090;lr;transport=udp>
Max-Forwards: 70
From: "Ã.ÆABÇAHÅÌÊAM" <sip:71414@mobileoffice.mn>;tag=ef1bbf733c
To: <sip:95344523@mobileoffice.mn>
Call-ID: 97ccd9718ea68f2b
CSeq: 27160 INVITE
Allow: INVITE, ACK, OPTIONS, BYE, CANCEL, REGISTER, INFO, PRACK, UPDATE
Contact: <sip:71414@172.16.20.6:5060>
Min-SE: 90
P-Asserted-Identity: "Ã.ÆABÇAHÅÌÊAM" <sip:71414@mobileoffice.mn>
Session-Expires: 1800
Supported: 100rel, timer
User-Agent: HiPath 4000 V5.0 M5T SIP Stack/4.0.26.26
Content-Type: application/sdp
Content-Length: 356

v=0
o=MxSIP 131094 133166257 IN IP4 172.16.20.6
s=SIP Call
c=IN IP4 172.16.20.6
t=0 0
m=audio 29100 RTP/AVP 8 18 4 98 99
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=rtpmap:4 G723/8000
a=rtpmap:98 telephone-event/8000
a=rtpmap:99 red/8000
a=silenceSuppn - - - -
a=fmtp:18 annexb=no
a=fmtp:4 annexa=no
a=fmtp:98 0-15,32-36,49
a=fmtp:99 98


From uri field must be sip account number like <sip:+97675779982@mobileoffice.mn>. Please advice to our customer how to configure it.

BR,
Ganzorig Boldbaatar

 

[sbcsu]

Hi,
AS ADVISED...
Change the LODR for the LDAT
The LODR should be something like

ADD-LODR:222,,,,NPI,ISDN,INTERNAT;
ADD-LODR:222,,,,OUTPULSE,97675779982;
ADD-LODR:222,,,,ECHO,2;
ADD-LODR:222,,,,END;

Then make sure that the LODR is used in the LDAT for outbound

Run a trace on the HiPath assistant looking at the outbound number being sent

 

[Moriendi]

LODR is going to help change the dialled digits.

From the post from gan3o it looks like they want to replace the calling digits.

You can either use SDAT PUBNUM for that, and enter PUBNUM in LDAT attributes so it knows to use the SDAT config, or change KNMAT to have it suppress the calling digits and insert new.

 

[Javzaa]

Hi guys.
Thank you for your consideration. We've done some changes with your help.

ADD-LODR:75,,,,NPI,ISDN,UNKNOWN ;
ADD-LODR:75,,,,ECHO,2;
ADD-LODR:75,,,,END;
ADD-LODR:75,,,"SIP MOBI";

Also we have attached file that is traffic monitoring of the trunk group 75.

 

[sbcsu]

Hi,
You need to go into Switch Diagnosis Support then into the tracing.
Specify the PEN there and start a trace before making a call