Shortcode for Analogue lines

[Ant007]

Hi All
I have a customer with 6 channels of ISDN.
They having a problem when one individual wanted an outside line there were never any available. I have since installed a 4 port Analogue trunk card so that the user can always get an outside line.
What I am unsure about is how to set up the shortcode so he can press a digit to access the analogue line.
I have used the examples in the help files but have still not been able to make it work.
Cheers

 

[intrigrant]

Use LCR, see

http://www.tek-tips.com/faqs.cfm?fid=6169

 

[rushingnative]

All you should have to do is setup a short code with the line group ID of the analog line and the feature "Dial"
Example
*95
.
401 or whatever the analog line group is.
Dial

Then all they would have to do is dial the shortcode and it will pick up that line - then they can dial out.