jessicawalker
IS-IT--Management
I need to reconfigure the caller inputs in shoretel. When people hit 0 they are being sent to the wrong operator. How do i do this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
shoretel help
- Thread starter jessicawalker
- Start date
- Status
OldPhoneGuy
Technical User
Using ShoreWare Director choose Administration > Sites. Choose the site that you need to change the operator for. Under Operator Extension enter the extension number of the operator that you wish to use.
- Thread starter
- #3
jessicawalker
IS-IT--Management
We have done this, however it is still xfering the calls to the wrong person..
OldPhoneGuy
Technical User
I know this is a dumb question, but is the call handling mode for the operator set to always forward to the person who is receiving the calls?
GSmitherman
Programmer
Individual Users can set their own zero out. You can check what they have set under Individual Users, Personal Options,Edit Call Handling Mode and check what they have for personal assistant.
- Status
Similar threads
- Locked
- Question