Sharing Park numbers between 2 switches with SCN

[telecomgear]

I have 2 IP500's with 4.2.49501 linked with SCN and I want both switches so share/pickup park zones and cannot figure it out. Can it be done? Thanks.

----- "Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes."-------

 

[Notsetinstone]

No it cannot.

http://www.nu-tel.com

 

[telecomgear]

Thanks

----- "Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes."-------

 

[Notsetinstone]

However, you could get creative with unused analog ports and the pickup function.

http://www.nu-tel.com

 

[telecomgear]

Yes, I thought of that, and may have to use that scenario if I have to. Thanks.

----- "Before you criticize someone, you should walk a mile in their shoes. That way, when you criticize them, you're a mile away and you have their shoes."-------

 

[SuperJenks]

You can also use conference zones as a park zone. I have done it. Receptionists have to be careful not to park two outside callers in the same zone.

ACS IPO-I

 

[Notsetinstone]

you don't get the blf on the remote site that way.

http://www.nu-tel.com