Setup help 1

[LuisManson]

Hello, i need some ideas on the setup we have at work since im not able to find a solution
Main office:
second office: 1 ipo500 - 1 1608 phone - mikrotik w/ 1 WAN

the main office has:
ipo500 - avaya 1608 ip phones - mikrotik router / 2 WANs
1=data (192.168.1.0/24)
805=voip (10.1.1.0/24)

Seccond office: NO vlan (192.168.2.0/24)

there is an IPsec tunel between them (192.168.1.0<->192.168.2.0)

Not i have one issue, i can not get voice to work between those offices, also on the second office i see packets from thir phone IP address destinated for the IP of a phone inside our voice vlan. I
I think the IPO or the mikrotik should do some kind of nat or proxy work, but im lost in this area...
there is also a trunk between both IPOs (shouldn't voice go over there?)

As a side note i have this same problem (no voice) if i put one phone on the data vlan 1
PS: the main office IPO has nettwork available on both vlans

thanks!

 

[CptIPO]

Turn Direct Media Path off on all phones on both systems.

ACIS - Avaya Certified Implementation Specialist
ACSS - Avaya Certified Support Specialist
APSS - Avaya Professional Sales Specialist
Yes we have VoIP in Cape Town