Servicecode for outgoing trunk on MxOne

[lb5oa]

Hi !
I know the servicecode *0*routru#0 works ok on TSW, but it is not ok on MxOne.
Is it another syntax or is the service itself removed ?
LA6YBA

 

[sia30]

first nansi:numse=0,numtyp=ed;
second roddi:rou=x,dest=0;

 

[himdp]

Hi la6yba,
according to the user guides published in CPI for MX-One TSE V5, the procedure is unchanged.
i.e.

External calls on individual external line
• Lift the handset (dial tone).
• Dial the access number.
• Dial *0* individual external line number# external destination code and external number.

Perhaps you are doing something wrong or have the wrong trunk number for the assigned dest.
For example, if you have dest=0 and the route is 9 with trunk number 1-1 to 1-30, if you want to access trunk number 1-12 you will dial-
*0*112#0 followed by the number you want to dial.

 

[Satellite1900]

*0*0010001#800 -----> *0*LIMnumber_trunknumber#destnumber
Work Fine

\Satellite1900

 

[lb5oa]

Tested the code today, and it works.
The syntax in Norway is: *0*xxxyyyy#0publicnumber
xxx is lim-number, yyyy is trunk-number and public number must be dialed immediately after the destination-code.
LA6YBA

 

[Satellite1900]

what I had written.......

\Satellite1900