Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Service ON

Status
Not open for further replies.

Igman1969

Technical User
Apr 8, 2007
19
CA
I have created routing service for VoIp fall back dialing. Service is automatic.
When service is on, multiple sets are showing
" Service ON " at all times.

Any ideas why????
 
In fallback what you will call the normal mode is actually a service mode. The system will be in a service mode until the circuit goes down and it goes into fallback and at that time it is in normal mode.

SHK Certified (School of Hard Knocks)
NCSS
 
It has to do with the Control Set. One telephone will display at all times, unavoidable.

Adversity is Opportunity
 
I know it should display on the control set only.
I have about 10-15 sets displaying " Service ON "
Thanks for your reply.
 
Is it all patched up? Have you tried a reboot?

SHK Certified (School of Hard Knocks)
NCSS
 
Do you have multiple control sets? You can assign 1 control set per phone and line. Do you have a different control set for certain phones?

SHK Certified (School of Hard Knocks)
NCSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top