ylancantho
IS-IT--Management
What kind of scsi cable to connect to the scsi connector of xserve?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
scsi cable for xserve
- Thread starter ylancantho
- Start date
- Status
- Thread starter
- #3
ylancantho
IS-IT--Management
I plan to connect a backup drive to Xserve which uses SCSI.
- Thread starter
- #4
ylancantho
IS-IT--Management
I plan to connect a backup drive to Xserve which uses SCSI.
What is the best way to back up the Xserve? Recommendation of software, hardware, etc. Thank you.
What is the best way to back up the Xserve? Recommendation of software, hardware, etc. Thank you.
ObviousTroll
Programmer
ylancantho,
Xserves use ATA or SATA drives; you'll need to buy a SCSI card if you want to back up to a SCSI device. I've looked around a little and it doesn't appear that Apple themselves sell one.
Xserves use ATA or SATA drives; you'll need to buy a SCSI card if you want to back up to a SCSI device. I've looked around a little and it doesn't appear that Apple themselves sell one.
- Thread starter
- #7
Try and check out the UL4S PCI Card.
It's been awhile, we use SCSI LTO Autoloaders on the G4 Servers using UL3D cards but I don't see that those are available.
Why SCSI? You can back up to firewire.
JustShady
It's been awhile, we use SCSI LTO Autoloaders on the G4 Servers using UL3D cards but I don't see that those are available.
Why SCSI? You can back up to firewire.
JustShady
- Status
Similar threads
- Locked
- Question