Does anyone know of of script etc that will enable the nic and login to a 2000 or netware server from a 95/98/nt workstation using a boot disk. I do not want to bring the windows operating system up and need to boot and run from DOS.
If you give me your email address I will email you a self-extracting file I made. It will create a DOS boot disk that will use a 3COM 3c90x NIC. You will be able to change the NIC driver to match you NIC if you need to.
I know this is an old post but if anyone still has the file for floppy boot to a network, I would really appreciate a copy. My email is dms@dmscci.com.
You want the ultimate boot disk with lots of card drivers that works and any windows system. This guy’s site is the best I have found. I have been using this disk (After self assembly) for 6 months. And I cannot fault it.
You have down load the client and you use winrar to add your own drivers if you like. Very good. Be patient. I use it with Norton’s Ghost to image laptops.
Enjoy!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.