SunfireSSR
Technical User
I recently installed SCO 5.06 on a new SuperMicro P4sca MB with only this mouse(PS/2)issue. After the install, I used the "mk mouse" command to install the mouse driver. The ball action works fine, but the mouse buttons don't won't or respond everytime. I used the "usemouse echo" command to watch the reaction from the mouse to confirm the buttons weren't being seen by the system. I tried all (3) mouse settings and (2) different brands of mice. I tested both mice on another SCO Box with no issues. I also tried changing the kbm_poll and kbm_resolution settings with no luck.
I've never installed SCO on a P4 MB before so I'm wondering if it has something to do with the PS/2 on the MB.
I've been putting SCO on P3 MB's for about 13 yrs. now, and I'm still learning. This is the 1st time to use a P4 MB.
Any help will be greatly appreciated !!! Thanks !!!
I've never installed SCO on a P4 MB before so I'm wondering if it has something to do with the PS/2 on the MB.
I've been putting SCO on P3 MB's for about 13 yrs. now, and I'm still learning. This is the 1st time to use a P4 MB.
Any help will be greatly appreciated !!! Thanks !!!